Description
Software updates for DRBIII current owners are available through OEMTools.com. The current update package is a one time software update that includes all released scan tool updates and re-programming calibration files as of the end of 2008. Customers electing this one time update will not have to perform any further updates on their DRB-III's. Software updates for DRBIII current owners are available through OEMTools.com. The current update package is a one time software update that includes all released scan tool updates and re-programming calibration files as of the end of 2008. Customers electing this one time update will not have to perform any further updates on their DRB-III's. To order by telephone, please call 1-586-532-8400. The Controller Technologies Corporation DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007. The DRB III software application now runs on your personal computer and interfaces with a custom DRB III hardware device to enable all the functions of the original Chysler DRB III Scan Tool and more. This software package even comes with non-powertrain ECU programming files to enable reflashing everthing from BCMs to sliding door modules. FOXWELL Scan Tool NT624 Elite All Systems Diagnostic Scanner for Cars with Oil Light EPB Service Reset, Check Engine Tran ABS SRS SAS EPS HVAC Headlamp Obd2 Code Reader (2021 Upgraded Version) 4.3 out of 5 stars 1,164. Drb iii scan tool bidirectional scan tool.
The Controller Technologies Corporation DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007. The DRB III Emulator software application now runs on your personal computer and interfaces with our custom DRB III+ hardware device to enable all the functions of the original Chrysler DRB III Scan Tool and more. This software package even comes with non-powertrain ECU programming files to enable reflashing everything from BCMs to sliding door modules.
*Note: When purchasing, case is not included.
Features
This hardware setup comes equipped with the addition of a J2534 HS CAN Pass-Thru interface, making this setup even more advanced than the original DRB III! This addition will allow flash reprogramming of the latest model year Chrysler vehicles and also allows you to interface with our U-Scan OBD II diagnostic application (our generic scan tool software).
*Note that Powertrain flash files are supported through Chrysler's Tech Authority website and requires a separate subscription.
Supported Protocols:
- SAE J1850 PWM (FORD)
- SAE J1850 VPW
- SAE J2610 SCI (CHRYSLER)
- ISO 15765 (Network Transport Protocol)
- ISO 11898 (High Speed CAN)
- ISO 14230 (Keyword2000)
- ISO 9141/9141-2 (K-Line)
- Chrysler Collision Detection Bus (CCD)
*All hardware interfaces required for J1979 OBD II Diagnostic applications
Here are steps to install DRB3 emulator for Chrysler diagnosis and programming.
Chrysler Drbiii Scan Tool
DRB III Emulator definition:
DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007.
Crj 900 manual. Installation Notes:
In order to install the Enhanced DRB III Emulator, you must have the wiTECH Diagnostic Application (wiTECH 1.0) installed as well as all supporting software.
The wiTECH 1.0 can be downloaded and installed on a Windows PC from DealerCONNECT (DealerCONNECT > Service > wiTECH Information (Under the SERVICE TOOLS & EQUIPMENT section) > Legacy Tools > wiTECH Software Installer).
In order to install DRB III Enhanced Emulator you must have a microPod II Device that has Entitlements for the Enhanced version. This is different that those for the wiTECH Diagnostic Application (wiTECH 1.0) or the Original DRB III Emulator. This microPod II Device will only work with the wiTECH Diagnostic Application (wiTECH 1.0) and Enhanced DRB III Emulator.
DRB3 Emulator: Worked with MicroPod 2 or VCI Pod?
MicroPod 2 original: Yes!
wiTech MicroPod 2 clone: Need luck!
VCI Pod original: Yes!
in detail…
Steps to DRB3 Emulator on Win7/Win10:
1. Connect the microPod II device that will be used with Enhanced DRB III Emulator to a Windows computer that has the wiTECH Diagnostic Application (wiTECH 1.0) either through the USB-microUSB cable or by plugging the microPod II device into a vehicle's OBDII port and having both the microPod II device and the computer on the same wireless network.
2. Add a wireless profile to the microPod II
3. Open the wiTECH Diagnostic Application (wiTECH 1.0) and look for the microPod II device in the connection wizard.
4. In the example below, the microPod II device name is 'wiTECH 1.0 microPod.' It has been discovered over Wi-Fi and USB.
5. Once the device is found in the connection wizard, click on the name.
6. Clicking on the name will cause the 'Launch DRB III Enhanced' button to appear to the left of the 'Next' button in the bottom right corner.
7. If the button appears with 'Launch DRB III' with no 'Enhanced', you will need to contact the Help Desk to get the Enhanced entitlements added.
8. Click the 'Launch DRB III Enhanced' button and accept the EULA that is presented. A warning will be presented indicating that Enhanced DRB III Emulator is not installed. Press 'OK' to start the installation process.
Drbiii Scan Tool Software For Laptop
9. The wiTECH Diagnostic Application (wiTECH 1.0) will now close and the 'Enhanced DRB III Emulator Stub' will begin to install. Follow through any dialog prompts to continue the installation.
10. With the 'Enhanced DRB III Emulator Stub' installed, select the check box for 'Enhanced DRB III Emulator Application vx.xx.xxxx' and click the 'Install' button in the bottom right corner of the window.
Features
This hardware setup comes equipped with the addition of a J2534 HS CAN Pass-Thru interface, making this setup even more advanced than the original DRB III! This addition will allow flash reprogramming of the latest model year Chrysler vehicles and also allows you to interface with our U-Scan OBD II diagnostic application (our generic scan tool software).
*Note that Powertrain flash files are supported through Chrysler's Tech Authority website and requires a separate subscription.
Supported Protocols:
- SAE J1850 PWM (FORD)
- SAE J1850 VPW
- SAE J2610 SCI (CHRYSLER)
- ISO 15765 (Network Transport Protocol)
- ISO 11898 (High Speed CAN)
- ISO 14230 (Keyword2000)
- ISO 9141/9141-2 (K-Line)
- Chrysler Collision Detection Bus (CCD)
*All hardware interfaces required for J1979 OBD II Diagnostic applications
Here are steps to install DRB3 emulator for Chrysler diagnosis and programming.
Chrysler Drbiii Scan Tool
DRB III Emulator definition:
DRB III Emulator is the exact scan tool software application used in Chrysler, Jeep, and Dodge dealerships to service non-CAN based vehicles from 1998-2007.
Crj 900 manual. Installation Notes:
In order to install the Enhanced DRB III Emulator, you must have the wiTECH Diagnostic Application (wiTECH 1.0) installed as well as all supporting software.
The wiTECH 1.0 can be downloaded and installed on a Windows PC from DealerCONNECT (DealerCONNECT > Service > wiTECH Information (Under the SERVICE TOOLS & EQUIPMENT section) > Legacy Tools > wiTECH Software Installer).
In order to install DRB III Enhanced Emulator you must have a microPod II Device that has Entitlements for the Enhanced version. This is different that those for the wiTECH Diagnostic Application (wiTECH 1.0) or the Original DRB III Emulator. This microPod II Device will only work with the wiTECH Diagnostic Application (wiTECH 1.0) and Enhanced DRB III Emulator.
DRB3 Emulator: Worked with MicroPod 2 or VCI Pod?
MicroPod 2 original: Yes!
wiTech MicroPod 2 clone: Need luck!
VCI Pod original: Yes!
in detail…
Steps to DRB3 Emulator on Win7/Win10:
1. Connect the microPod II device that will be used with Enhanced DRB III Emulator to a Windows computer that has the wiTECH Diagnostic Application (wiTECH 1.0) either through the USB-microUSB cable or by plugging the microPod II device into a vehicle's OBDII port and having both the microPod II device and the computer on the same wireless network.
2. Add a wireless profile to the microPod II
3. Open the wiTECH Diagnostic Application (wiTECH 1.0) and look for the microPod II device in the connection wizard.
4. In the example below, the microPod II device name is 'wiTECH 1.0 microPod.' It has been discovered over Wi-Fi and USB.
5. Once the device is found in the connection wizard, click on the name.
6. Clicking on the name will cause the 'Launch DRB III Enhanced' button to appear to the left of the 'Next' button in the bottom right corner.
7. If the button appears with 'Launch DRB III' with no 'Enhanced', you will need to contact the Help Desk to get the Enhanced entitlements added.
8. Click the 'Launch DRB III Enhanced' button and accept the EULA that is presented. A warning will be presented indicating that Enhanced DRB III Emulator is not installed. Press 'OK' to start the installation process.
Drbiii Scan Tool Software For Laptop
9. The wiTECH Diagnostic Application (wiTECH 1.0) will now close and the 'Enhanced DRB III Emulator Stub' will begin to install. Follow through any dialog prompts to continue the installation.
10. With the 'Enhanced DRB III Emulator Stub' installed, select the check box for 'Enhanced DRB III Emulator Application vx.xx.xxxx' and click the 'Install' button in the bottom right corner of the window.
11. Follow through any dialog prompts to complete installation. Once installation has completed, open the wiTECH Diagnostic Application and select the microPOD II device using the Connection Wizard. Click the 'Launch DRB III Enhanced' to open the Enhanced DRB III Emulator. The emulator will appear as shown below if you are connected to a vehicle.
Note: You must be connected to a vehicle in order to launch the DRB III Enhanced Emulator.
Drb Iii Scan Tool Rental Autozone
Disclaimer: this instruction is copied for sharing info only, not originated from obdii365.com. It's your own risk! Good luck!
